The VLG V2426-004-A-01 dual-polarized panel antenna provides directional coverage for compatible 5 GHz wireless equipment. The listed ±45-degree polarization arrangement supports evaluation in systems using separate polarized RF paths. Its panel format is useful when coverage should be concentrated toward a defined area or link direction.
Key specifications and selection criteria
| Item |
Details |
| Model |
V2426-004-A-01 |
| Range |
5125–6125 MHz |
| Polarization |
±45° |
| Pattern |
Directional |
| Listed element gain |
11 dBi |
| Vertical beamwidth |
65 ± 5° |
| Horizontal beamwidth |
20 ± 5° |
| S11 / efficiency |
≤ −8 dB; ≥ 65% per element |
| Impedance |
50 Ω |
Choose directional coverage deliberately
The specification lists 11 dBi gain per antenna element, with different beamwidths in the two principal planes. That directional pattern requires attention to alignment. A panel antenna is appropriate when the desired coverage area is known; a broader surrounding service area may call for a different pattern.
Match polarization and feed connections
Confirm the radio’s port count and the panel’s released connector map. Align the intended polarization arrangement at both ends of a link where applicable. Multiple polarized paths can support the radio architecture, but the antenna does not determine the modulation or data rate.
Use the listed frequency range
The electrical range is 5125–6125 MHz. Match the equipment’s permitted channels to that range. Calling it a 5.8 GHz antenna does not establish support across every Wi-Fi band or a complete 6 GHz service range.
Check the mounted link
Evaluate alignment, mounting rigidity, cable loss and obstructions using the actual radio. Keep the specified beam orientation with the installation drawing. Review link performance under representative conditions instead of assigning a distance from gain alone.
Frequently asked questions
Is this an omnidirectional Wi-Fi antenna?
No. It uses a directional panel pattern, so orientation and alignment matter.
Does the antenna alone make a MIMO link?
The radio and RF connections must support the required multiple paths. Confirm the panel feed arrangement and radio compatibility.
Explore related vlg antenna products for your project.
Discuss your antenna project with VLG
Send VLG your required frequency bands, radio or receiver model, available installation space and cable requirements. Include the target application and order quantity so the team can review a suitable antenna configuration.
Request antenna specifications, samples or an OEM quotation.
Home > 
+86 186 8871 1070
