1. Low noise, high gain, low noise factor;
2. Good circular polarization axis ratio and gain bandwidth
3. Beautiful appearance, good water resistance, corrosion resistance and high temperature resistance.
The VLG 32dB High-Gain Timing Antenna delivers exceptional signal stability and precision. It supports multiple satellite systems, including GPS, BDS, and GLONASS, ensuring continuous and accurate timing synchronization for demanding industrial applications.
The VLG 32dB High-Gain Timing Antenna is perfect for base stations, communication networks, smart cities, and IoT infrastructure. It ensures precise timing, dependable connectivity, and optimized GNSS performance in every application scenario.
1. GPS Dielectric antenna technical specification
| Tech Item | Specification |
| Frequency | 1568±10 MHz |
| Band Width | ≥ 20MHz |
| Gain | 4 dBi |
| Output VSWR | 1.5 max |
| Polarization) | RHCP |
| Impedance | 50Ω |
2. Antenna Specification (Include LNA)
| Tech Item | Specification |
| Range Of Receiving Frequency (MHz) | 1575.42±1.023, 1561.098±2.046 |
| Polarization | RHCP |
| Gain(dBi) | 32±2 (LNA) |
| Axis ratio(dB) | < 5@ Center Frequency |
| Front to back Power (dB) | > 10 |
| 3dB beam width | 110士10 |
| Noise figure(dB) | < 2.5max |
| Output VSWR | ≤ 2.0:1 |
| Output impedance(ohm) | 50 |
| Out of band rejection(dBc) | f0=1568MHz±50MHz:50dBc min
f0=1568MHz±100MHz:65dBc min |
| Passband Ripple(dB) | 1575.42MHz±1.023MHz : <1dB
1561.098MHz±2.046MHz : <1dB |
| 1dB compression point output(dBm) | >-10(Only LNA) |
| Jam rejection of large signal
Reception functions are normal in these conditions |
When a large signal of 0dBm is added to a frequency 100MHz away from the center, the change of the antenna’s in-band gain is less than 2dB.
When a large signal of -10dBm is added to a frequency 60MHz away from the center, the change of the antenna’s in-band gain is less than 2dB. When a large signal of -20dBm is added to a frequency 50MHz away from the center, the change of the antenna’s in-band gain is less than 2dB. |
| Prime power(V) | 3V~8V |
| Operating current(mA) | ≤30mA |
3 、Environment
| Relative Humidity | 90% |
| Operating Temperature(℃) | ~40℃~ +80℃ |
| Store Temperature(℃) | -45℃~ +85℃ |
| Operation Environment | Outdoor, Meet IP67 |
4 、 Structure
| Dimension(mm) | φ102*103mm |
| Connector | N-J |
5 、 Reliability
Surge resistion:5ka 8/20us ±5 times
6、 Diagram
6.1 Body structure

7、 Package
7.1 Inner Carton(110*110*113mm)Package
| S/N | Content | QTY | Mark |
| 1 |
|
1 | 1PC/CARTON
A paper bracket is installed in the inner box to support the antenna body
Carton size: 110*110*113mm Bracket Size:102*102*40mm |
| 2 |
|
27 | Per layer 3*3=9pcs
3 layer total 27pcs |
| 3 |
|
27 | Outer carton size: 360(L)*360(W)*360(H)mm |

+86 186 8871 1070
You can also reach us on +86 186 8871 1070, or sales@vlg-tech.com. Our sales department will reply to you soon.