Contact Contact

Get quotation
Language
×
首页图标Home >  Product > Satellite Antenna > GNSS Antenna
GNSS Antenna

High accuracy L1+L5 GNSS Antenna for Vehicles

Antenna adopted multi-feed point and completely symmetrical structure, which lower the influence of antenna to measurement error while surveying.

Antenna has high Gain, with pattern wide beam, with good reception with low elevation signal, insure the normal satellite signal reception even in serious occlusion environment.

The Low noise amplifier section adopted pre-filtering scheme to effectively suppress out-of-band interference and improve the reliability of the system.

Leave a messageJT-9292 Long Distance UHF RFID Integrated Reader(Multi-tag) ContactHigh accuracy L1+L5 GNSS Antenna for Vehicles

Overview

General info.:

Product Name:Dual band car antenna

P/D:V1831-012-A-01

Frequency:GPS L1/L5、BDS B1/ B2、GLONASS  L1

 

Application:

This is a high precision car antenna covered GPS L1/L5, BDS 2nd generation B1/ B2, GLONASS L1, it can meet the request of multi-system compatible and high precision measuring from GNSS surveying equipment. It is widely be used in Geodesy and mapping, Marine survey, Geological deformation monitoring and other filed.

 

Features:

Antenna adopted multi-feed point and completely symmetrical structure, which lower the influence of antenna to measurement error while surveying.

Antenna has high Gain, with pattern wide beam, with good reception with low elevation signal, insure the normal satellite signal reception even in serious occlusion environment.

The Low noise amplifier section adopted pre-filtering scheme to effectively suppress out-of-band interference and improve the reliability of the system.

Specification

Electrical Spec.
Frequency Range(MHz) GPS L1/L5、BDS B1/ B2、GLONASS L1
Polarization Right-hand circular polarization
Gain(dBi) (Under 200*200mm base board)

Elevation 90°≥4.0

-1dB beam width°≥120°

Axial Ratio(dB) ≤3
LNA Gain(dB) 2`12
Flatness in Band (dB) ±2
V.S.W.R <2.0
Noise Figure (dB) <3.0
DC Voltage (V) 3.0-5.0
Current (mA) <40
Impedance(Ω) 50
Mechanical Spec.
Dimensions(mm) 56.5*61.5*23.0mm
Connector Type 3M(cable length) with SMA_J
Operating Temperature (℃) -45~+85
Storage Temperature (℃) -55~+85
Operation Environment Outdoor
Ingress Protection IP65
Structure diagram

High accuracy L1+L5 GNSS Antenna for Vehicles

JT-9292 Long Distance UHF RFID Integrated Reader(Multi-tag)

Have questions?

VLG Technical Consultants are here to assist you!

JT-9292 Long Distance UHF RFID Integrated Reader(Multi-tag)+86 186 8871 1070

JT-9292 Long Distance UHF RFID Integrated Reader(Multi-tag)Sales@vlg-solution.com

Leave a message

Related Products

Leave a message

Have a question. Talk to our Sales, Engineering or CS Teams today.

Contact
SHENZHEN VLG WIRELESS TECHNOLOGY CO., LTD

You can also reach us on +86 186 8871 1070, or sales@vlg-tech.com. Our sales department will reply to you soon.

Leave a message

    This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.